Dakota Digital Series III instrument systems offer the latest technologies and features for your custom vehicle. High brightness vacuum fluorescent displays provide a lifetime of trouble free use while offering increased accuracy and features!

VFD3-71M - The Dakota Digital 6 Gauge Instrument System 1971- 73 Ford Mustang will come in two different styles dependent on your model. Kit mounts into existing instrument housing.

Please note: The Clock gauge shown in the middle of the above pic is NOT included in the VFD3-71M system. This optional clock, part number CLK-71M, can be purchased in our store separately.

* Clock is not available for dash's with Center Console Gauges.
**Bezel is not included, you must use your stock gauge bezel.

System is available in MPH and degrees Fahrenheit or KM/H and degrees Celsius (metric MFD3 version). If you want to order the metric MFD3- version, please just let us know when you make your order. There is no additional cost, though it may take approx 1-8 weeks to build the metric version.

Please scroll through listing below for more information on the system.

       

The other option available is the VFD3-71M-CNT, sold separately in our store:

The VFD3-71M-CNT is the 1971- 73 Ford Mustang Digital Instrument Systems for the optional center console gauge package, sold separately. (NOT INCLUDED in this listing)

**Bezel is not included, you must use your stock gauge bezel.
*** Clock option is not available on Center Console style dash.

Speedometer

0-255 MPH (optional metric version: 0-255 km/h)

 

Tachometer

0-17,500 RPM

 

Oil Temperature

0-99 PSI

 

Water Temperature

0-300°F (optional metric version 0-150°C)

 

Fuel Level

0-99%

 

Voltmeter

8-17 VDC

 

Standard Colors

Blue or Teal

Standard Displays

Odometer (One Time User Settable, Million Mile)

Dual (A/B) Trip Meter (0-9,999.9)

 

Performance Meters

0-60 MPH Timer (0-100 km/h)

1/4 mile time

1/4 mile end speed (trap speed)

High speed recall

High RPM recall

 

Gauges

Speedometer (0-255 MPH/kmh) opposite scale of main speedometer.

Indicators

Turn Signals (Left/Right)

High Beam

Check Engine

Parking Brake

Cruise Control (On / On & Engaged, when vehicle is equipped)

Gear Position (Optional GSS-3000 sensor is required, sold separately, GSS-3000 is NOT included)

4 x 4 (When vehicle is equipped)

Wait to Start (When vehicle is equipped)

Water Temperature

1/8" NPT, ground isolated sensor with a 10ft harness.

 

Oil Pressure

1/8" NPT, solid state sensor with a 10ft harness.

 

Cable Drive Speed Sensor/Generator

Replaces Ford and/or GM style speedometer cables with a 10ft harness.

 

Bushings

Each kit comes with 1/8" to 1/4", 3/8" and 1/2" NPT bushings along with bushings for 12mm and 16mm x 1.5 threads.

Push Button

Dakota Digital instruments are programmed and operated by the push of a button. Simply mount the included pushbuttons supplied with your gauges in a convenient and easily accessible location. These buttons are used to calibrate your speedometer, set the cylinder count and the fuel level gauge. Once properly configured these same buttons are used to access the wealth of information located in the Digital Message Centers.

---